Peugeot 208: Particle emissions filter (Diesel)
Peugeot 208 Owners Manual
The start of saturation of the particle filter is indicated by the temporary illumination of this warning lamp accompanied by a warning message in the screen.
As soon as the traffic conditions permit, regenerate the filter by driving at a speed of at least 40 mph (60 km/h) until the warning lamp goes off.
If the warning lamp stays on, this indicates a low additive level.
On a new vehicle, the first particle filter regeneration operations may be accompanied by a "burning" smell, which is perfectly normal.
Following prolonged operation of the vehicle at very low speed or at idle, you may, in exceptional circumstances, notice the emission of water vapour at the exhaust on acceleration. This does not affect the behaviour of the vehicle or the environment.
Other info:
Peugeot 208. Cornering lighting
With dipped or main beams, this function makes use of the beam from a front foglamp
to illuminate the inside of a bend, when the vehicle speed is below 25 mph (approximately
40 km/h) (urban driv ...
Peugeot 208. Filling
A self-adhesive label on the inner face of the filler flap reminds you of the
type of fuel to use depending on your engine.
Additions of fuel must be of at least 5 litres to be registered by the ...
Peugeot 208. Parking sensors
This system indicates the proximity of an obstacle (person, vehicle, tree, gate,
etc.) which comes within the field of detection of sensors located in the bumper.
Certain types of obstacle (stake ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
