1. Sealing
Avoid removing any foreign bodies which have penetrated into the tyre.
Take care, this product is harmful (e.g. ethylene-glycol, colophony...) if swallowed and causes irritation to the eyes.
Keep it out of reach of children.
Switch on the compressor by moving the switch B to position "I" until the tyre pressure reaches 2.0 bars. The sealant is injected into the tyre under pressure; do not disconnect the pipe from the valve during this operation (risk of splashing).
Do not start the compressor before connecting the white pipe to the tyre valve: the sealant product would be expelled through the pipe.
If after around 5 to 7 minutes the pressure is not attained, this indicates that the tyre is not repairable; contact a PEUGEOT dealer or a qualified workshop for assistance.
2. Inflation
Visit a PEUGEOT dealer or a qualified workshop as soon as possible.
You must inform the technician that you have used this kit. After inspection, the technician will inform you whether the tyre can be repaired or must be replaced.
Honda Fit. Reporting Safety Defects
In the U.S.
If you believe that your vehicle has a defect which could cause a crash or
could cause injury or death, you
should immediately inform the National Highway Traffic Safety Administration ...
Mazda 2. Maintenance Monitor
Maintenance Monitor (Type A/Type B audio)
“Oil Change” with fl exible setting *1 is available. Consult an Authorised
Mazda Repairer for
details*2 . When the engine oil fl exible maintenance se ...
Peugeot 208. Operation
On an ascending slope, with the vehicle stationary, the vehicle is held for a
brief moment when you release the brake pedal:
- if you are in first gear or neutral with a manual gearbox,
- if you ...