Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you put the gear lever into neutral, and you release the clutch pedal, - with an electronic gearbox , at speeds below 5 mph (8 km/h), when you press the brake pedal or you put the gear lever into position N .
Going into engine START mode
The "ECO" warning lamp goes off and the engine restarts:
- with a manual gearbox, when you press the clutch pedal, - with an electronic gearbox: ● with the gear lever in position A or M, when you release the brake pedal, ● or with the gear lever in position N and brake pedal released, when you move the gear lever to position A or M, ● or when you engage reverse.
Deactivation / Reactivation
You can deactivate the system at any time by pressing the "ECO OFF" button; the button's warning lamp comes on.
The system is automatically reactivated every time the engine is started with the key.
Before refuelling or doing anything under the bonnet, you must switch off the ignition with the key.
Peugeot 208. With dual-zone digital air conditioning
Automatic visibility programme
Select this programme to demist or defrost the windscreen and side windows as
quickly as possible.
The system automatically manages the air conditioning, air flow an ...
Citroen C3. Window controls
System which opens or closes a window
manually or automatically. It is fi tted with
a system which provides protection if an
obstacle is detected on the one-touch
models and a deactivation sys ...
Peugeot 208. Service indicator
System which informs the driver when the next service is due, in accordance with
the manufacturer's servicing schedule. The point at which the service is due is
calculated from the last indica ...