Renault Clio: On-board computer: general information

On-board computer 1

Renault Clio. On-board computer 1


Depending on the vehicle, this includes the following functions:

Display selection keys 2 and 3

Renault Clio. Display selection keys 2 and 3


Scroll through the following information upwards (key 2) or downwards (key 3) by pressing briefly and successively (the display depends on the vehicle equipment and country).

  1. total mileage and trip mileage recorder;
  2. fuel used;
  3. average fuel consumption;
  4. current fuel consumption;
  5. estimated range;
  6. distance travelled;
  7. average speed;
  8. distance before service;
  1. Reset the tyre pressure
  2. Cruise control and speed limiter programmed speed
  3. Clock and temperature
  4. Trip log, operating faults and information message readout

Resetting the trip mileage

Renault Clio. Resetting the trip mileage


With “trip mileage recorder” selected on the display, press button 2 or 3 until the mileage recorder resets to zero.

Resetting the journey parameters (reset button)

With one of the trip parameters selected as the display, press and hold button 2 or 3 until the display resets

Interpreting some of the values displayed after resetting

The values showing average fuel consumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. Therefore, the average fuel consumption may decrease when:

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

READ NEXT:

 Trip computer

 Trip settings

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY Examples of selections Interpreting the display selected a) Total mileage and trip

 Trip computer and warning system

Information messages These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages.

SEE MORE:

 Gear lever/Handbrake

Gear lever Vehicles with manual gearbox: refer to the grid on the gear lever knob 1. Vehicles with automatic gearbox: refer to the information on the “Automatic gearbox” in Section 2. Selecting reverse gear The reversing lights will come on as soon as reverse gear is selected wit

 K9K, and 772

Detach the turbocharger front temperature sensor wiring harness on the injector rail protector mounting. Remove: the injector rail protector mounting bolts (13), the injector rail protector support. Disconnect: the damper valve connector (14) (if equipped), the camshaft position

© 2016-2024 Copyright Renault Clio Owners Club