Fig. 141 Changing a wheel: Loosening the wheel bolts
Undoing
Tightening
WARNING
Undo the wheel bolts only a little (about one turn) until the vehicle has been jacked up. Otherwise the wheel could come off and fall down – there is a risk of injury.
Note
If it proves difficult to undo the bolts, carefully apply pressure to the end of the wrench with your foodt. Keep hold of the vehicle when doing so, and make sure you keep your footing.
Ford Fiesta. Load Carrying
General Information
WARNINGS
Use load securing straps to an
approved standard, e.g. DIN.
Make sure that you secure all loose
items properly.
Place luggage and other loads as low
and as far forward a ...
Mazda 2. Starting a Flooded Engine
(SKYACTIV-G 1.3 and SKYACTIV-G 1.5 )
If the engine fails to start, it may be
fl ooded (excessive fuel in the engine).
Follow this procedure:
If the engine does not start within
fi ve seconds on the fi rst try, wait ten
second ...
Fiat Punto. Starting procedure for petrol
versions
Proceed as follows:
Ensure that the handbrake is up;
Put the gear lever into neutral;
Press the clutch pedal down to the floor without
touching the accelerator;
Turn the ignition key to AV ...