1. Lift the driver side wiper arm first, then the passenger side.
2. Place a cloth on the edge of the lock tab.
Push the lock tab up with a flat-tip screwdriver.
3. Slide the blade from the wiper arm
NOTICE
Avoid dropping the wiper arm; it may damage the windshield.
4. Slide the wiper blade out from its holder by pulling the tabbed end out.
5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.
► Correctly align the rubber protrusion and the retainer grooves.
6. Slide the new wiper blade onto the holder from the bottom end.
► The tab on the holder should fit in the indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm, then push down the lock tab.
8. Lower the passenger side wiper arm first, then the driver side.
Nissan Micra. Air conditioner operation (if so equipped)
Start the engine, turn the fan control dial to the
desired position and press the button to
activate the air conditioner. When the air conditioner
is on, cooling and dehumidifying functions
are ad ...
Nissan Micra. Forward-facing child restraint installation
using the seat belts
WARNING
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure to
use the ALR mode will result in the child
rest ...
Ford Fiesta. Keys and Remote Controls
General Information on Radio
Frequencies
This device complies with Part 15 of the
FCC Rules and with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditio ...