Peugeot 208: Moving off
Peugeot 208 Owners Manual
- Apply the parking brake.
- Select position P or N.
- Start the engine.
If this procedure is not followed, there is an audible signal, accompanied by the display of an warning message.
- With the engine running, press the brake pedal.
- Release the parking brake.
- Select position R, D or M.
- Gradually release the brake pedal.
The vehicle moves off immediately.
If position N is selected inadvertently while driving, allow the engine to return to idle then select position D to accelerate.
When the engine is running at idle, with the brakes released, if position R, D or M is selected, the vehicle moves even without the accelerator being pressed. When the engine is running, never leave children in the vehicle without supervision.
When carrying out maintenance with the engine running, apply the parking brake and select position P .
Other info:
Nissan Micra. Brake and clutch (if so equipped) fluid
For additional information on brake fluid specification,
refer to “Recommended fluids/lubricants
and capacities” in the “Technical and consumer
information” section of this manual.
...
Peugeot 208. Programming
Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected
but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
...
Renault Clio. Windscreen washers and wipers
With the ignition on, move stalk 1
A park.
B intermittent wiping.
The wipers will pause for several
seconds between sweeps. It is
possible to change the time between
sweeps by turn ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
