■ Reasons for indicator lamp to come on or blink
• Comes on when there is a problem with the engine emissions control system, or the fuel fill cap is missing, or loose.
• Blinks when engine misfiring is detected.
■ What to do when the indicator lamp comes on
Avoid high speeds and immediately get your vehicle inspected at a dealer.
■ What to do when the indicator lamp blinks
Park the vehicle in a safe place with no flammable items and wait at least ten minutes or more with the engine stopped until it cools.
NOTICE
If you drive with the malfunction indicator lamp on, the emissions control system and the engine could be damaged.
If the malfunction indicator lamp blinks again when restarting the engine, drive to the nearest dealer at 31 mph (50 km/h) or less. Have your vehicle inspected.
■Check/Tighten Fuel Cap Message
■ The message appears on when:
An evaporative system leak is detected. This may be caused by the fuel fill cap being loose or not being installed.
■ What to do when the message appears:
1. Stop the engine.
2. Check that the fuel fill cap is fully installed.
► If not, loosen the cap, and then retighten it until it clicks at least once.
3. Drive for several days of normal driving.
► The message should go off.
■ When the malfunction indicator lamp comes on
Malfunction indicator lamp comes on if the system continues to detect a leak of gasoline vapor. If this happens, check the fuel fill cap using the procedures described above.
Fiat Punto. Emergency start-up
If the Fiat CODE system fails to deactivate engine
immobilising system the warning lights
and
stay on and the engine cannot be started.
To start the engine the emergency start-up can be
perfo ...
Peugeot 208. Operating fault
In the event of a malfunction
of the system, when reverse gear is engaged this warning lamp is displayed in the
instrument panel and/or a message appears in the screen, accompanied by an audible ...
Honda Fit. Adjusting the Sound
Press the (sound) button, and
rotate
to adjust the setting.
Each time you press the button, a
sound
mode switches as follows.
When the adjustment level reaches the center, you
will ...