B-Class car manuals
Peugeot 208: Locking the vehicle with full alarm system - Alarm - Access - Peugeot 208 Owners Manual

Peugeot 208: Locking the vehicle with full alarm system

Peugeot 208 Owners Manual

Peugeot 208 / Peugeot 208 Owners Manual / Access / Alarm / Locking the vehicle with full alarm system

Activation

Switch off the ignition and get out of the vehicle.

Press the locking button
on the remote control.

 

The monitoring system
is active: the indicator lamp in the button flashes once per second.

After the locking button on the remote control is pressed, the exterior perimeter monitoring is activated after a delay of 5 seconds and the interior volumetric monitoring after a delay of 45 seconds.

If an opening (door, boot...) is not closed fully, the vehicle is not locked but the exterior perimeter monitoring will be activated after a delay of 45 seconds at the same time as the interior volumetric monitoring.

Deactivation

Press the unlocking
button on the remote control.

 

The alarm system is
deactivated: the indicator lamp in the button goes off.

 

    Alarm

    Locking the vehicle with exterior perimeter monitoring only

    Other info:

    Peugeot 208. Maintenance
    Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from automatic operation of START mode. This system requires a battery with a sp ...

    Renault Clio. ECO mode
    ECO mode is a function which optimises fuel consumption. It acts on all elements which consume fuel (engine power, heating and/or air conditioning, etc). Activating the function Press switch ...

    Nissan Micra. Horn
    To sound the horn, push near the horn icon on the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag sy ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0099