Deactivate the interior volumetric monitoring to avoid unwanted triggering of the alarm in certain cases such as:
- leaving a pet in the vehicle, - leaving a window partially open, - washing your vehicle.
Deactivation of the interior volumetric monitoring
Switch off the ignition.
Within ten seconds, press the button until the indicator lamp is on continuously.
Get out of the vehicle.
Press the locking button on the remote control immediately.
The exterior perimeter monitoring alone is activated: the indicator lamp in the button flashes once per second.
To be effective, this deactivation must on the remote control. be carried out each time the ignition is switched off.
Reactivation of the interior volumetric monitoring
Press the unlocking
button on the remote control to deactivate the exterior perimeter monitoring.
Press the locking button
on the remote control to activate all the monitoring functions.
The indicator lamp in
the button again flashes once per second.
Mazda 2. Centre-Rear Position Seat Belt
Fastening the Seat Belt
Pull the seat belt tongue to the desired
length.
Insert it into the seat belt buckle until
you hear a click sound.
Adjust the belt length.
To lengthen t ...
Mazda 2. Parking in an Emergency
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is ...
Honda Fit. Side Curtain Airbags
The side curtain airbags help protect the heads of the driver and passengers
in outer
seating positions during a moderate-to-severe side impact.
The side curtain airbags are most effective when an ...