Locking and unlocking the vehicle
From the outside of the vehicle, the driver's door may be locked or unlocked using the key.
When opened, the latch will rise up (for vehicles without central locking)
For vehicles equipped with electric windows and central locking, if the key is maintained in the opening position all of the electric side windows will open.
When locking the latch will descend (for vehicles without central locking)
In some vehicle models equipped with electric windows and central locking, if the key is maintained in the locking position on the driver side, any side windows left open, as well as the electric sunroof, will close. For vehicles without central locking, the passenger door and the rear doors may be locked from the outside without using a key. Just press the button down and close the door. The latch on the driver’s door may not be pushed down while the door is open (only in vehicles without central locking). This avoids accidentally leaving the keys in the ignition. From inside all the doors may be locked by pushing the security buttons down (in vehicles without central locking).
WARNING
• Exercise extreme caution when closing the windows and the sunroof from the outside of the vehicle.
• Closing from the outside without taking care or observing all the vehicle may cause bruising for other people especially children.
• When locking a vehicle, never leave children unaccompanied inside, as it will be difficult to provide assistance if required.
• When the doors are locked, any intrusion is impeded, for example while stopped at a red light.
Mazda 2. Rear Window Wiper and Washer
The ignition must be switched ON to use
the wiper.
Rear Window Wiper
Turn the wiper on by turning the rear
wiper/washer switch.
Rear Window Washer
To spray washer fl uid, turn the rear wipe ...
Seat Ibiza. Seat belts
Seat belt adjustment
The seat belts for the front and rear occupants are locked into position by a
latch.
Fig. 11 Belt buckle and latch plate of seat belt
The seat belt cannot offer its full pr ...
Fiat Punto. Refitting the standard wheel
Proceed as follows:
Following the procedure described previously, raise the car and
remove the spare wheel;
Make sure the contact surfaces between wheel and hub are clean so
that the fas ...