Windscreen wiper
If the jet of fluid is inadequate, firstly check that there is fluid in the reservoir: see “Checking fluid levels” in this section).
Then check that the nozzle holes are not clogged, if necessary use a needle.
The windscreen jets are directed by adjusting the angle of the nozzles: turn the nozzle cylinder by inserting a screwdriver in (A).
Fluid jets shall be directed at about 1/3 height from the window upper edge.
Rear window wiper
Rear window washer jets can be adjusted in the same way. The nozzle holder is on the rear window.
Seat Ibiza. Digital display in the instrument panel
Digital clock
– Turn the setting knob, fig. 32
anti-clockwise to the stop to set the hour. If the knob is turned briefly anti-clockwise
the clock will advance one hour further. – Turn ...
Peugeot 208. "Auto sequential" mode
In the automated mode, you can resume control temporarily at any time using the
steering mounted control paddles.
The use of these paddles permits manual selection of the gears in situations
whic ...
Citroen C3. Trajectory control
systems
Anti-skid regulation (ASR) and
electronic stability programme
(ESP)
The anti-skid regulation (also known as
Traction Control) optimises traction to
prevent skidding of the wheels, by acting
...