Peugeot 208: Operating fault
Peugeot 208 Owners Manual
With the ignition on,
the flashing of this warning lamp and the flashing of AUTO , accompanied by an audible
signal and a message in the instrument panel screen, indicates a malfunction of
the gearbox. have it checked by PEUGEOT or a qualified workshop.
You must press the brake pedal when starting the engine. Whatever the circumstances, you must manually apply the parking brake to immobilise the vehicle.
Other info:
Peugeot 208. Changing a fuse
Before changing a fuse:
the cause of the failure must be identified and rectified,
all electrical consumers must be switched off,
the vehicle must be immobilised with the ignition off,
ident ...
Renault Clio. Running in
Petrol version
For the first 600 miles (1,000 km), do
not exceed 78 mph (130 km/h) in the
highest gear, or 3,000 to 3,500 rpm.
You may only expect top performance
from your vehicle after approx ...
Citroen C3. Weights and towed loads
* The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount. Warning: towing using a lightly loaded towing veh ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
