Renault Clio: Luggage compartment cover: estate version

Renault Clio IV (2014-2019) Owners Manual / Your comfort / Luggage compartment cover: estate version

To remove the flexible section of the luggage compartment cover 1

Renault Clio. To remove the flexible section of the luggage compartment cover 1


Pull handle 2 gently to release the pins from their mounting points located on each side of the luggage boot.

Guide the luggage cover onto the roller.

Removing the luggage compartment cover

Renault Clio. Removing the luggage compartment cover


Using the handle 2, push the luggage cover to the right (movement A) and lift the left-hand side (movement B) in the inertia reel.

To refit the luggage cover, insert the right-hand side, then push it to the right (movement A) and lower the left-hand side of the inertia reel into its housing.

Luggage compartment cover storage 1

Renault Clio. Luggage compartment cover storage 1


Lift the mobile floor (please refer to the information on “Boot storage space and fittings” in section 3).

Store the luggage compartment cover by inserting it, one side at a time.

Replace the mobile floor.

Do not place any objects, especially heavy or solid objects on the luggage compartment cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

READ NEXT:

 Boot storage

Mobile floor When fitted to the vehicle, it can be used to make loading easier. Note: if you need to access the ISOFIX ring and/or the net ring at the bottom of the boot, open flap 3.

 Transporting objects in the boot

Always position the objects transported so that the largest surface is against: The rear bench seatback for normal loads (example A). The front seatbacks with the rear seatbacks

 Transporting objects

SEE MORE:

 Suspended engine mounting: Tightening torque

D4F Tightening torque (in Nm) K4J, and JH3 K4M, and JH3 K4M, and DP0 K9K, and JR5 K9K, and JH3 K9K, and TL4 D4F, and JH3 M4R, and DP0 F4R M4R, and TL4

 D4F, and JA3

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the air filter box (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17), the battery (see Battery: Removal - Refit

© 2016-2024 Copyright Renault Clio Owners Club