
1. Close all doors, the trunk/liftgate, and the hood.
2. Lock the vehicle in one of two ways:
on the
3. After 30 seconds the alarm system will arm, and the indicator light will begin
to slowly flash indicating the alarm system is operating. Pressing
on the RKE transmitter a second time
will bypass the 30-second delay and immediately arm the alarm system.
The vehicle alarm system will not arm if the doors are locked with the key.
If the driver door is opened without first unlocking with the RKE transmitter,
the horn will chirp and the lights will flash to indicate pre-alarm. If the vehicle
is not started, or the door is not unlocked by pressing
on the RKE transmitter during the 10–second
pre-alarm, the alarm will be activated.
If a door, the hood, or the liftgate is opened without first unlocking with the RKE transmitter, the turn signals will flash and the horn will sound for about 30 seconds. The alarm system will then re-arm to monitor for the next unauthorized event.
Peugeot 208. Resuming manual control
Depending on your requirements, you can make a different selection from that
offered by the system by changing a setting. The other functions will still be controlled
automatically.
Press the &qu ...
Fiat Punto. Tailgate opening
To open the tailgate from outside, turn the ignition key in the lock.
To open the tailgate from the inside, pull lever (A) next to driver’s seat.
IMPORTANT Do not operate the lever (A) when th ...
Peugeot 208. Locking the vehicle with exterior perimeter monitoring only
Deactivate the interior volumetric monitoring to avoid unwanted triggering of
the alarm in certain cases such as:
- leaving a pet in the vehicle,
- leaving a window partially open,
- washing your ...