Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you put the gear lever into neutral, and you release the clutch pedal, - with an electronic gearbox , at speeds below 5 mph (8 km/h), when you press the brake pedal or you put the gear lever into position N .
Going into engine START mode
The "ECO" warning lamp goes off and the engine restarts:
- with a manual gearbox, when you press the clutch pedal, - with an electronic gearbox: ● with the gear lever in position A or M, when you release the brake pedal, ● or with the gear lever in position N and brake pedal released, when you move the gear lever to position A or M, ● or when you engage reverse.
Deactivation / Reactivation
You can deactivate the system at any time by pressing the "ECO OFF" button; the button's warning lamp comes on.
The system is automatically reactivated every time the engine is started with the key.
Before refuelling or doing anything under the bonnet, you must switch off the ignition with the key.
Mazda 2. Headlight Washer
The ignition must be switched ON and the
headlights must be turned on.
The headlight washers operate
automatically once every fi fth time the
windscreen washer operates.
If you want to operat ...
Skoda Fabia. Measurement of fuel consumption and CO2 emissions according to
ECE Regulations and EU Directives
The data on fuel consumption and CO 2 emissions were not available at the
time of going to press.
The data on fuel consumption and CO 2 emissions are given on the ŠKODA
websites or in the sa ...
Honda Fit. Playing a CD
Your audio system supports audio CDs, CD-Rs, and CD-RWs in either MP3 or WMA
format. With the CD loaded, press the CD button.
■How to Select a File from a Folder with the Selector Knob
(MP3 ...