B-Class car manuals
Fiat Punto: Using the seat belts - Seat belts - Safety deviices - Fiat Punto Owners Manual

Fiat Punto: Using the seat belts

Fiat Punto Owners Manual

The belt should be worn keeping the chest straight and rested against the seat back.

To fasten the belt, take hold the tongue (A) and insert it into the buckle (B), until hearing the locking click.

At removal, if it jams, let it rewind for a short stretch, then pull it out again without jerking.

To unfasten the seat belts, press button (C). Guide the seat belt with your hand while it is rewinding, to prevent it from twisting.

Through the reel, the belt automatically adapts to the body of the passenger wearing it, allowing freedom of movement.

When the car is parked on a steep slope the reel mechanism may block; this is normal. The reel mechanism prevents the webbing coming out when it is jerked or if the car brakes sharply, in a collision or when cornering at high speeds

Using the seat belts


Never press button (C)
when travelling.

Using the seat belts


The rear seat is fitted with inertial seat belts with three anchor points and reel for the side seats and adjustable lap belt with two anchor points for the centre seat.

On certain versions the rear centre seat is fitted with seat belt with three anchor points and reel.

In order to avoid incorrect fastening, the tabs of the side seats and the buckle of the centre lap belt are incompatible.

Rear seat belts shall be worn as shown in the figure. To fold the seat back, see paragraph “Extending the boot” in section “Dashboard and controls”.

IMPORTANT Remember that in the event of a violent collision, back seat passengers not wearing seat belts also represent a serious danger for the front seat passengers.

Using the seat belts


Using the seat belts


    Seat belts

    Front seat belt height adjustment

    Other info:

    Skoda Fabia. Disconnecting or reconnecting
    The following functions are initially deactivated or are no longer able to operate faultlessly after the vehicle battery has been disconnected and reconnected. Note We recommend having the vehi ...

    Peugeot 208. Dynamic stability control (DSC)
    Activation This system is activated automatically each time the vehicle is started. It comes into operation in the event of a grip or trajectory problem. This is indicated by flashing of this wa ...

    Mazda 2. Manual Transaxle Operation
    Manual Transaxle Shift Pattern The vehicle is equipped with either a 5-speed or 6-speed manual transaxle. The shift pattern for each is shown above. Depress the clutch pedal all the way down ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0145