
For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth to wipe surfaces. Before wiping the surface with the microfiber cloth, use a soft bristle brush to remove dirt that could scratch the surface. Then use the microfiber cloth by gently rubbing to clean. Never use window cleaners or solvents. Periodically hand wash the microfiber cloth separately, using mild soap. Do not use bleach or fabric softener. Rinse thoroughly and air dry before next use.
Caution
Do not attach a device with a suction cup to the display. This may cause damage and would not be covered by the warranty.
Mazda 2. If a Warning Light Turns On or Flashes
If any warning light turns on/fl ashes, take appropriate action for each
light. There is no
problem if the light turns off, however if the light does not turn off or turns
on/fl ashes again,
con ...
Skoda Fabia. Voice control
Dialogue
The period of time during which the system is ready to receive voice commands
and to carry them out is called a dialogue. The system gives audible
feedback and guides you if necessary thro ...
Fiat Punto. Conditions of use
Cold starting
Short journeys and frequent cold starts do not allow
the engine to reach optimum operating temperature.
This results in a significant increase in consumption
levels (from +15 to +3 ...