Chevrolet Sonic: Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
Chevrolet Sonic Owners Manual
Sedan Taillamp Shown, Hatchback Taillamp Similar
1. Back-up Lamp
2. Turn Signal Lamp
3. Stop Lamp/Taillamp
4. Sidemarker Lamp
To replace one of these bulbs:
1. Open the trunk.
2. Remove the two screws, which secure the taillamp assembly.
3. Remove the taillamp assembly by pulling it straight back until the two posts disengage from the grommets.
4. Remove the bulb socket from the taillamp assembly by turning it counterclockwise.
5. Remove the bulb by pulling it straight out.
6. Install a new bulb into the bulb socket.
7. Install the bulb socket into the taillamp assembly by turning it clockwise.
8. Install the taillamp assembly and tighten the two screws.
Other info:
Fiat Punto. Rain sensor (where provided)
The rain sensor is behind the driving mirror in contact with the
windscreen and has the purpose of automatically adjust, during the
intermittent operation, the frequency of the windscreen wiper stro ...
Skoda Fabia. Tyre pressure monitor
Fig. 135 Button for setting the tyre inflation pressure control value
System settings
A system configuration must be run as follows after adjusting the tyre
pressure,
after changing one or mo ...
Seat Ibiza. Fitting a towing bracket
It is possible to fit a towing bracket to the rear of the vehicle.
Fig. 123 Attachment points for towing bracket
If a towing bracket is to be fitted after the vehicle is purchased, this must
be ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
