Mazda 2: Laser Sensor
Mazda2 Owners Manual
The Smart City Brake Support (SCBS) laser sensor is installed at the top of the windscreen near the rearview mirror.
Always keep the surface of the windscreen around the laser sensor clean to assure proper operation of the Smart City Brake Support (SCBS) system.
WARNING
As there is the possibility of eye damage occurring from the laser, always heed the following precautions:
- Never remove the sensor.
- A removed sensor will not meet the conditions for a class 1M laser under the IEC 60825-1 specifi cation and therefore eye safety cannot be assured.
- Do not peer into the sensor using optical instruments with a magnifi cation function such as magnifying glasses, and microscopic and objective lenses within a distance of 100 mm (3.94 in) from the sensor.
Laser sensor radiation data
Maximum average power: 45 mW
Pulse duration: 33 ns
Wavelength: 905 nm
Divergence angle (horizontal×vertical): 28 degrees×12 degrees
Other info:
Fiat Punto. To open the bonnet
Proceed as follows:
pull lever (A) in the direction of the arrow;
press lever (B) as shown by the arrow;
open the bonnet and release the rod (C) from its clip at the same
time. Insert the en ...
Peugeot 208. Airbags
System designed to maximise the safety of the occupants (with the exception of
the rear centre passenger) in the event of violent collisions. It supplements the
action of the force-limiting seat b ...
Nissan Micra. List of commands
When you press and release the
button on
the steering wheel, you can choose from the
commands on the Main Menu. The following
pages describe these commands and the commands
in each sub-menu ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
