
With all doors closed, apply the parking brake, fasten the seat belts and place the ignition switch in the ON position without starting the engine.
The following lights (if so equipped) will come on:
,
,
,
,
The following lights (if so equipped) come on briefly and then go off:
,
If any light fails to come on or operate in a way other than described, it may indicate a burnedout bulb and/or a system malfunction. Have the system checked by a NISSAN dealer.
Some indicators and warnings are also displayed in the trip computer located to the right of the speedometer. For additional information, refer to “Meters and gauges” in this section.
Peugeot 208. "Auto sequential" mode
In the automated mode, you can resume control temporarily at any time using the
steering mounted control paddles.
The use of these paddles permits manual selection of the gears in situations
whic ...
Skoda Fabia. Raising the vehicle
Fig. 142 Jacking points for positioning lifting jack
Fig. 143 Attach lifting jack
Position the car jack below the jacking point closest to the flat tyre » Fig.
142.
The jacking point i ...
Peugeot 208. Locations for ISOFIX child seats
In accordance with European Regulations, this table indicates the options for
installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In the case of universal and semi-u ...