B-Class car manuals
Nissan Micra: Seat belt extenders - Seat belts - Safety—Seats, seat belts and supplemental restraint system - Nissan Micra Owners Manual

Nissan Micra: Seat belt extenders

Nissan Micra Owners Manual

If, because of body size or driving position, it is not possible to properly fit the lap/shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available for purchase.

The extender adds approximately 200 mm (8 in) of length and may be used for either the driver or front passenger seating position. See a NISSAN dealer for assistance with purchasing an extender if an extender is required.

WARNING
  • Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts.
  • Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident.
  • Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be seriously injured or killed in a collision or a sudden stop.
    Three-point type seat belt with retractor

    Seat belt maintenance

    Other info:

    Ford Fiesta. Stability Control
    Principle of Operation Electronic Stability Program WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. Failure to drive with due care and attention c ...

    Peugeot 208. Interior
    Interior mood lighting This subdued passenger compartment lighting improves visibility inside the vehicle in low lighting conditions. It comprises several lamps, located below the instrument pa ...

    Citroen C3. Weights and towed loads
      * The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount. Warning: towing using a lightly loaded towing veh ...

    Manuals For Car Models


    © 2016-2026 Copyright www.b-auto.net 0.0066