
The air conditioning system only operates with the engine running.

If you put the air flow control in position 0 (system off), the temperature is no longer controlled. However, a slight flow of air can still be felt, resulting from the movement of the vehicle.
3. Air distribution adjustment
Windscreen and side windows.
Windscreen, side windows and footwells.
Footwells.
Central and side vents.
The air distribution can be adapted
by placing the dial in an intermediate position.
4. Air intake / Air recirculation
The recirculation of interior air insulates the passenger compartment from exterior odours and smoke.
Return to exterior air intake as soon as possible to prevent deterioration of the air quality and the formation of mist.

Press the button to recirculate the interior air. The indicator lamp comes on to confirm this.
Press the button again to allow fresh air into the passenger compartment. The indicator lamp goes off to confirm this.
5. Air conditioning On / Off

The air conditioning is designed to operate effectively in all seasons, with the windows closed.
It enables you to:
- lower the temperature, in summer, - increase the effectiveness of the demisting in winter, above 3 °C.
Switching on
Press the "A/C" button, the button's indicator lamp comes on.
The air conditioning does not operate when the air flow adjustment control 2 is in position " 0".
To obtain cooled air more quickly, you can use recirculation of interior air for a few moments. Then return to fresh air intake.
Switching off
Press the "A/C" button again, the button's indicator lamp goes off.
Switching off may affect comfort levels (humidity, condensation).
Peugeot 208. Operation
Anti-lock braking system (ABS) and electronic brake force distribution (EBFD)
When this warning lamp
comes on, accompanied by an audible signal and a message, it indicates that there
is a fault w ...
Skoda Fabia. Brakes
WARNING
Greater physical effort is required for braking when the engine
is switched
off – there is the risk of an accident
The clutch pedal must be depressed when braking on a vehicle
...
Peugeot 208. Stop & Start
Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you ...