B-Class car manuals
Peugeot 208: Operating fault - Automatic gearbox - Driving - Peugeot 208 Owners Manual

Peugeot 208: Operating fault

Peugeot 208 Owners Manual

When the ignition is on, the lighting
of this warning lamp, accompanied by an audible signal and a message in the multifunction screen, indicates a gearbox fault.

In this case, the gearbox switches to back-up mode and is locked in 3rd gear. You may feel a substantial knock when changing from P to R and from N to R . This will not cause any damage to the gearbox.

Do not exceed 60 mph (100 km/h), local speed restrictions permitting.

Contact a PEUGEOT dealer or a qualified workshop as soon as possible.

There is a risk of damage to the gearbox:

- if you press the accelerator and brake pedals at the same time, - if you force the movement of the gear lever from the P position to another position when the battery is flat.

To reduce fuel consumption when at a prolonged standstill with the engine running (traffic jam...), put the gear lever in the N position and apply the parking brake.

    Stopping the vehicle

    Stop & Start

    Other info:

    Mazda 2. Child-Restraint System Suitability for Various Seat Positions Table
    (Europe and countries conforming to the UNECE 16 regulation) Provided information in the table shows your child-restraint system suitability for various seating position. For installation suitabil ...

    Peugeot 208. Special position of the windscreen wipers
    This position permits release of the windscreen wiper blades. It is used for cleaning or replacement of the blades. It can also be useful, in winter, to detach the blades from the windscreen. ...

    Peugeot 208. Towing your vehicle
    On the front bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Place the gear lever in neutral (position N on an electronic gearbox ...

    Manuals For Car Models


    © 2016-2025 Copyright www.b-auto.net 0.0084