B-Class car manuals
Peugeot 208: Removal - Mats - Comfort - Peugeot 208 Owners Manual

Peugeot 208: Removal

Peugeot 208 Owners Manual

To remove the mat on the driver's side:

  • move the seat as far back as possible,
  • unclip the fixings,
  • remove the mat.

Refitting

To refit the mat on the driver's side:

  • position the mat correctly,
  • refit the fixings by pressing,
  • check that the mat is secured correctly.

To avoid any risk of jamming of the pedals:

- only use mats which are suited to the fixings already present in the vehicle; these fixings must be used, - never fit one mat on top of another.

The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control / speed limiter.

    Fitting

    Boot fittings

    Other info:

    Nissan Micra. Engine cooling system
    The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round antifreeze and coolant p ...

    Mazda 2. High Beam Control System (HBC)
    The High Beam Control System (HBC) determines the conditions in front of the vehicle using the Forward Sensing Camera (FSC) while driving in darkness to automatically switch the headlights betwe ...

    Nissan Micra. Loading tips
    The GVW must not exceed GVWR or GAWR as specified on the C.M.V.S.S. certification label. Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR. WARNING ...

    Manuals For Car Models


    © 2016-2023 Copyright www.b-auto.net 0.0079