Peugeot 208: Stopping the vehicle
Peugeot 208 Owners Manual
Before switching off the engine, you can choose to:
- move to position N to engage neutral, - leave the gear engaged; in this case, it will not be possible to move the vehicle.
In both cases, you must apply the parking brake to immobilise the vehicle.
When immobilising the vehicle, with the engine running, you must place the gear lever in neutral N.
Before carrying out any work in the engine compartment, check that the gear lever is in neutral N and that the parking brake is applied.
Other info:
Peugeot 208. Operation
Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when yo ...
Fiat Punto. Cellular phone set-up
The system set-up, combined with radio consists of:
dual-purpose aerial (sound system + cellular phone
900/1800 MHz), on the car roof;
dual-purpose connection wires and ten-pin
connector wir ...
Renault Clio. Running in
Petrol version
For the first 600 miles (1,000 km), do
not exceed 78 mph (130 km/h) in the
highest gear, or 3,000 to 3,500 rpm.
You may only expect top performance
from your vehicle after approx ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
