Fig. 145 Principle sketch: Components of the breakdown kit
The kit is located in a box under the floor covering in the luggage compartment.
Components of the breakdown kit » Fig. 145
The valve remover 1 has a slot at its lower end which fits into the valve core.
This is the only way in which you can remove and re-install the valve core from the tyre valve. The same also applies to the replacement valve core 11 .
Honda Fit. Starting the Engine
1. Make sure the parking brake is applied.
Automatic transmission models
2. Check that the shift lever is in
, then
depress the brake pedal.
► Although it is possible to start the vehic ...
Skoda Fabia. Trailer
WARNING
Always drive particularly carefully with the trailer.
Loading a trailer
The vehicle/trailer combination must be balanced, whereby the maximum
permissible
drawbar load must be utilised. I ...
Peugeot 208. Switching the engine off
Immobilise the vehicle.
Turn the key fully towards you to position 1 (Stop) .
Remove the key from the ignition switch.
Free wheeling
For safety reasons, do not free wheel. If free wheeling, ...