
New engine
The engine has to be run in during the first 1 500 kilometres.
Up to 1 000 kilometres
From 1 000 up to 1 500 kilometres
Gradually increase the power output of the engine up to the full speed of the gear engaged, i.e. up to the maximum permissible engine speed.
The red scale on the rev counter indicates the range in which the system begins to limit the engine speed.
During the first operating hours the engine has higher internal friction than later until all of the moving parts have harmonized. The driving style which you adopt during the first approx.1 500 kilometres plays a decisive part in the success of running in your car.
Never drive at unnecessarily high engine speeds even after the running-in period.
On vehicles fitted with a manual gearbox, at the very latest shift up into the next gear when the red area is reached. Observe the recommended gear » page 28, Recommended gear. Very high engine speeds when accelerating (accelerator) are automatically restricted » .
In vehicles with manual transmission, do not drive at unnecessarily low engine speeds. Shift down a gear when the engine is no longer running smoothly. Observe the recommended gear » page 28, Recommended gear.
CAUTION
For the sake of the environment
Do not drive at unnecessarily high engine speeds. Shifting up sooner helps save fuel, reduces engine noise and protects the environment.
New tyres
New tyres have to be “run in” since they do not offer optimal grip at first. Drive especially carefully for the first 500 km or so.
New brake pads
New brake pads initially do not provide optimal braking performance. They first need to be “run in”. Drive especially carefully for the first 200 km or so.
Chevrolet Sonic. Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF
in each shift lever position.
For automatic transmission vehicles, the ignition should turn to LOCK/OFF
only ...
Chevrolet Sonic. Charging System Light
This light will come on briefly when the ignition is turned on, and the engine
is not running, as a check to show it is working.
It should go out when the engine is started. If it stays on, or co ...
Mazda 2. Front Seat
Seat Operation
Seat Slide
To move a seat forward or backward, raise the lever and slide the seat to the
desired position
and release the lever.
Make sure the lever returns to its orig ...