
Peugeot 208. Changing a fuse
Before changing a fuse:
the cause of the failure must be identified and rectified,
all electrical consumers must be switched off,
the vehicle must be immobilised with the ignition off,
ident ...
Peugeot 208. Programming
Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected
but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
...
Fiat Punto. Failure warning lights
Any failure is indicated by cluster warning light
coming on together with the message on the
reconfigurable multifunction display (where required)
(see section “Warning lights and messages”). ...