
This vehicle is equipped with a shift lock control. The shift lock control is designed to:
The shift lock control is always functional except in the case of an uncharged or low voltage (less than 9‐volt) battery.
If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting.
To shift out of P (Park):
1. Apply the brake pedal.
2. Turn the ignition to ON/RUN.
3. Press the shift lever button.
4. Move the shift lever to the desired position.
If still unable to shift out of P (Park):
1. Fully release the shift lever button.
2. Hold the brake pedal down and press the shift lever button again.
3. Move the shift lever to the desired position.
If you still cannot move the shift lever from P (Park), consult your dealer or a professional towing service.
The doors may lock when shifting from P (Park). See Automatic Door Locks.
Peugeot 208. Towing your vehicle
On the front bumper, unclip the cover by pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Place the gear lever in neutral (position N on an electronic gearbox ...
Citroen C3. Steering wheel adjustment
The height and reach of the steering
wheel can be adjusted to adapt the driving
position to the size of the driver.
Adjustment
When stationary , pull the control to
unlock the steering w ...
Fiat Punto. How to warm up the engine
after it has just started (petrol and diesel versions)
Proceed as follows:
Drive off slowly, letting the engine turn at medium
revs. Do not accelerate abruptly;
Do not drive at full performance for the initial
kilometres. Wait until the coolant ...