
1. Aim the RKE transmitter at the vehicle.
2. Press and release
.
3. Immediately after completing Step 2, press and hold
for at least four seconds or until
the turn signal lamps flash.
When the engine starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on.
The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once.
Peugeot 208. Coolant temperature gauge
With the engine running, when the needle is:
- in zone A , the temperature is correct,
- in zone B, the temperature is too high; the maximum temperature and the central
STOP warning lamps come o ...
Fiat Punto. How to warm up the engine
after it has just started (petrol and diesel versions)
Proceed as follows:
Drive off slowly, letting the engine turn at medium
revs. Do not accelerate abruptly;
Do not drive at full performance for the initial
kilometres. Wait until the coolant ...
Peugeot 208. Operation
On an ascending slope, with the vehicle stationary, the vehicle is held for a
brief moment when you release the brake pedal:
- if you are in first gear or neutral with a manual gearbox,
- if you ...