This shows the temperature of the engine coolant fluid and begins working when the fluid temperature exceeds approx. 50°C.
Under normal conditions, the needle should hover around the middle of the scale according to the working conditions.
C - low engine coolant temperature.
H - excessive engine coolant temperature.
The turning on of the warning light (B) (on certain versions together with the message shown on the reconfigurable multifunction display) indicates that the coolant fluid temperature is too high; in this case, stop the engine and contact a Fiat Dealership.
If the needle reaches
the red area, stop the engine immediately and contact a Fiat Dealership. |
Nissan Micra. Brake and clutch (if so equipped) fluid
For additional information on brake fluid specification,
refer to “Recommended fluids/lubricants
and capacities” in the “Technical and consumer
information” section of this manual.
...
Renault Clio. Fitting a radio
Radio location 1
Unclip the blanking cover. The aerial, +
and – supply and speaker wire connections
are located behind it.
Door speakers 2
To install any equipment, please consult
an a ...
Mazda 2. Seat Precautions
WARNING
Make sure the adjustable components of a seat are locked in place:
Adjustable seats and seatbacks that are not securely locked are dangerous. In a
sudden
stop or collision, the seat or se ...