Passive Anti-Theft System
Note: The system is not compatible with non-Ford aftermarket remote start systems.
Use of these systems may result in vehicle starting problems and a loss of security protection.
Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting problems if they are too close to the key when starting the engine. Prevent these objects from touching the coded key while starting the engine. Switch the ignition off, move all objects on the key chain away from the coded key and restart the engine if a problem occurs.
Note: Do not leave a duplicate coded key in the vehicle. Always take your keys and lock all doors when leaving the vehicle.
SecuriLock
The system is an engine immobilization system. It is designed to help prevent the engine from being started unless a coded key programmed to your vehicle is used.
Using the wrong key may prevent the engine from starting. A message may appear in the information display.
If you are unable to start the engine with a correctly coded key, a malfunction has happened and a message may appear in the information display.
Automatic Arming
The vehicle arms immediately after you switch the ignition off.
Automatic Disarming
Switching the ignition on with a coded key disarms the vehicle.
Replacement Keys
Note: Your vehicle comes equipped with two integrated keyhead transmitters or two intelligent access keys.
The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts the vehicle, as well as a remote control.
The intelligent access key functions as a programmed key that operates the driver door lock and activates the intelligent access with push button start system, as well as a remote control.
If your programmed transmitters or standard SecuriLock coded keys (integrated keyhead transmitters only) are lost or stolen and you do not have an extra coded key, you will need to have your vehicle towed to an authorized dealer. You need to erase the key codes from your vehicle and program new coded keys.
Store an extra programmed key away from the vehicle in a safe place to help prevent any inconveniences. See your authorized dealer to purchase additional spare or replacement keys.
Programming a Spare Integrated Keyhead Transmitter
Note: You can program a maximum of eight coded keys to your vehicle. All eight can be integrated keyhead transmitters.
You can program your own integrated keyhead transmitter or standard SecuriLock coded keys to your vehicle. This procedure will program both the engine immobilizer keycode and the remote entry portion of the remote control to your vehicle Only use integrated keyhead transmitters or standard SecuriLock keys.
You must have two previously programmed coded keys and the new unprogrammed key readily accessible. See your authorized dealer to have the spare key programmed if two previously programmed coded keys are not available.
Read and understand the entire procedure before you begin.
1. Insert the first previously programmed coded key into the ignition.
2. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
3. Switch the ignition off and remove the first coded key from the ignition.
4. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
5. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
6. Switch the ignition off and remove the second previously programmed coded key from the ignition.
7. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.
8. Switch the ignition from off to on. Keep the ignition on for at least six seconds.
9. Remove the newly programmed coded key from the ignition.
If the key has been successfully programmed it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter).
If programming was not successful, wait 10 seconds and repeat Steps 1 through 8.
If you are still unsuccessful, take your vehicle to your authorized dealer.
Programming a Spare Intelligent Access Key
See your authorized dealer to have additional keys programmed to your vehicle.
Anti-Theft Alarm
Alarm System
The perimeter alarm is a deterrent against unauthorized access to your vehicle through the doors and the hood. It also protects the audio unit.
Triggering the Alarm
Once armed, the alarm is triggered in any of the following ways:
Any further attempts to perform one of the above will trigger the alarm again.
Arming the Alarm
To arm the alarm, lock your vehicle. See Locks.
Disarming the Alarm
Vehicles Without Keyless Entry
Disarm and silence the alarm by unlocking the doors with the key and switching the ignition on with a correctly coded key or unlocking the doors with the remote control.
Vehicles with Keyless Entry
Note: A valid passive key must be located within the detection range of that door for keyless entry. See Keyless Entry.
Disarm and silence the alarm by unlocking the doors and switching the ignition on or unlocking the doors with the remote control.
Mazda 2. Towing Description
We recommend that towing be done only
by an expert repairer, we recommend
an Authorised Mazda Repairer or a
commercial tow-truck service.
Proper lifting and towing are necessary
to prevent dama ...
Ford Fiesta. Information Displays
General Information
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take you ...
Mazda 2. Removable Ashtray
The removable ashtray can be fi xed and
used in either of the front cup holders.
WARNING
Only use the removable ashtray in
its fi xed position, and make sure it is
completely inserted:
Using an ...