Replacing the Battery
If the indicator does not come on when the button is pressed, replace the battery.
Battery type: CR1616
1. Unscrew the cover with a small Phillipshead screwdriver.
► Wrap the small flat-tip screwdriver with a cloth to prevent scratching the transmitter.
2. Open the keypad.
► Wrap a coin with a cloth to prevent scratching the transmitter.
3. Make sure to replace the battery with the correct polarity.
NOTICE
An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.
Replacement batteries are commercially available or at a dealer.
Mazda 2. Bluetooth® Audio (Type C/Type D)
Applicable Bluetooth ® specifi cation
(Recommended)
Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0
(conformity)
Response profi le
A2DP (Advanced Audio Distribution
Profi le) Ver. 1.0/1.2
AVRCP (Audio/V ...
Skoda Fabia. Interior lights
Interior lighting - version 1
Fig. 45 Interior lighting – version 1
Positions of sliding switch A » Fig. 45.
Switch on
Switch off (middle position)
Control by the door contact
switch
...
Chevrolet Sonic. Engine Oil Pressure Light
Caution
Lack of proper engine oil maintenance can damage the engine. Driving with
the engine oil low can also damage the engine. The repairs would not be covered
by the vehicle warranty. Check th ...