Mazda 2: Emergency Operation for Starting the Engine
Mazda2 Owners Manual
If the KEY warning light (red) illuminates, or the push button start indicator light (amber) fl ashes, this could indicate that the engine may not start using the usual starting method. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible. If this occurs, the engine can be force-started. Press and hold the push button start until the engine starts.
Other procedures necessary for starting the engine such as having the key in the cabin, and depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) are required.
Other info:
Nissan Micra. Fog lights (if so equipped)
If replacement is required, see a NISSAN dealer.
CAUTION
High pressure halogen gas is sealed
inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or t ...
Renault Clio. Rear parcel shelf
Removal
Lower the rear headrests;
unhook the two cords 1 from the boot
door;
lift the parcel shelf 2 to half height in
order to unclip it (movement A);
push the shelf in (B m ...
Chevrolet Sonic. DIC Operation and Displays
The DIC has different displays which can be accessed by using the DIC buttons
on the turn signal lever on the left side of the steering wheel. The DIC displays
trip, fuel, and warning messages if ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
