Nissan Micra: If your vehicle overheats
Nissan Micra Owners Manual
If your vehicle is overheating (indicated by a red
high temperature warning light
), or
if you
feel a lack of engine power, detect abnormal
noise, etc. take the following steps.
WARNING
- Do not continue to drive if your vehicle
overheats. Doing so could cause engine
damage or a vehicle fire.
- To avoid the danger of being scalded,
never remove the radiator cap while the
engine is still hot. When the radiator
cap is removed, pressurized hot water
will spurt out, possibly causing serious
injury.
- Do not open the hood if steam is coming
out.
|
- Move the vehicle safely off the road, apply
the parking brake and move the shift lever to
N (Neutral) (manual transmission) or to P
(Park) (automatic transmission).
Do not stop the engine.
- Turn off the air conditioner. Open all the
windows, move the heater or air conditioner
temperature control to maximum hot and fan
control to high speed.
- Get out of the vehicle. Look and listen for
steam or coolant escaping from the radiator
before opening the hood. (If steam or coolant
is escaping, turn off the engine.) Do not
open the hood further until no steam or
coolant can be seen.
- Open the engine hood.
- Visually check drive belts for damage or
looseness. Also check if the cooling fan is
running. The radiator hoses and radiator
should not leak water. If coolant is leaking, the
water pump belt is missing or loose, or the
cooling fan does not run, stop the engine.
WARNING
- Be careful not to allow your hands, hair,
jewelry or clothing to come into contact
with, or get caught in, engine belts or
the engine cooling fan. The engine cooling
fan can start at any time.
- If coolant is leaking, or the cooling fan
does not run, stop the engine.
|
- After the engine cools down, check the coolant
level in the engine coolant reservoir tank
with the engine running. Add coolant to the
engine coolant reservoir tank if necessary.
Have your vehicle repaired at a NISSAN
dealer.
Other info:
Nissan Micra. Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system uses
various sensors to monitor driver inputs and vehicle
motion. Under certain driving conditions,
the VDC System helps to perform the following
functions ...
Fiat Punto. Starting procedure for diesel
versions
Proceed as follows:
Ensure that the handbrake is up;
Put the gear lever into neutral;
Turn the ignition key to MAR. The warning lights
and
will light up on the instrument
panel;
Wait ...
Renault Clio. Indicator lights (changing bulbs)
Courtesy light
Unclip the lens 1 (using a flat-bladed
screwdriver or similar).
Remove the bulb concerned.
Bulb type: W5W.
Luggage compartment light
Unclip the light 2 by pressing the ...