Heating
This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.
Ventilation
This mode directs outside air to the side and center vents.
Defrosting or defogging
This mode directs the air to the defrost outlets to defrost/defog the windows.
When the or
position is selected,
press the button to turn on the air conditioner
for better performance. This will dehumidify
the air and help defog the windows.
Bi-level heating
This mode directs cooler air from the side and center vents and warmer air from the floor outlets.
When the temperature control dial is moved to the full hot or full cool position, the air between the vents and the floor outlets is the same temperature.
Heating and defogging
This mode heats the cabin and defogs the windshield.
When the or
position is selected,
press the button to turn on the air
conditioner
for better performance. This will dehumidify
the air and help defog the windows.
Operating tips
Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation.
Peugeot 208. Operating fault
In the event of a speed limiter fault, the speed is cleared resulting in flashing
of the dashes. Have it checked by a PEUGEOT dealer or a qualified workshop.
On a steep descent or in the event of ...
Mazda 2. Starting a Flooded Engine
(SKYACTIV-G 1.3 and SKYACTIV-G 1.5 )
If the engine fails to start, it may be
fl ooded (excessive fuel in the engine).
Follow this procedure:
If the engine does not start within
fi ve seconds on the fi rst try, wait ten
second ...
Chevrolet Sonic. Finish Care
Application of aftermarket clearcoat sealant/wax materials is not recommended.
If painted surfaces are damaged, see your dealer to have the damage assessed and
repaired. Foreign materials such as ...