Nissan Micra: Air conditioner operation (if so equipped)
Nissan Micra Owners Manual
Start the engine, turn the fan control dial to the
desired position and press the button to
activate the air conditioner. When the air conditioner
is on, cooling and dehumidifying functions
are added to the heater operation.
The air conditioner cooling function operates
only when the engine is running.
Cooling
This mode is used to cool and dehumidify the air.
- Move the air intake lever to the
position.
- Turn the air flow control dial to the
position.
- Turn
the fan control
dial to the desired
position.
- Press the
button. The
indicator light
comes on.
- Turn the temperature control dial to the desired
position.
- For quick cooling when the outside temperature
is high, move the air intake lever to
the
position. Be sure to return
to
the
position for normal cooling.
Dehumidified heating
This mode is used to heat and dehumidify the air.
- Move the air intake lever to the
position.
- Turn the air flow control dial to the
position.
- Turn the
fan control
dial to the desired
position.
- Press the
button. The
indicator light
comes on.
- Turn the temperature control dial to the desired
position.
Dehumidified defogging
This mode is used to defog the windows and
dehumidify the air.
- Move the air intake lever to the
position.
- Turn the air flow control dial to the
position.
- Turn the
fan control dial to
the desired
position.
- Turn the temperature control dial to the desired
position.
Operating tips
- Keep the windows and moonroof closed
while the air conditioner is in operation.
- After parking in the sun, drive for 2 or 3 minutes
with the windows open to vent hot air
from the passenger compartment. Then
close the windows. This allows the air conditioner
to cool the interior more quickly.
- The air conditioning system should be
operated for approximately 10 minutes
at least once a month. This helps prevent
damage to the system due to lack
of lubrication.
- A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air
is cooled rapidly. This does not indicate a
malfunction.
- If the engine coolant temperature
gauge indicates engine coolant temperature
over the normal range, turn
the air conditioner off. For additional
information, refer to “If your vehicle
overheats” in the “In case of emergency”
section of this manual.
Other info:
Peugeot 208. Changing a wiper blade
Before removing a front wiper blade
Within one minute after switching off the ignition, operate the wiper stalk to
position the wiper blades vertically on the windscreen.
Removing
Raise the ...
Fiat Punto. Using the manual gearbox
To engage the gears, press the clutch pedal fully and shift the gear lever
into one of the required positions (the diagram is shown on the knob).
IMPORTANT The car can only be put into reverse gea ...
Peugeot 208. Switching the system off
Press the "empty fan"
air flow button until the fan symbol disappears and "---" appears.
This action switches off all of the functions of the air conditioning system.
The tempe ...