B-Class car manuals
Peugeot 208: Access to the tools - Changing a wheel - Practical information - Peugeot 208 Owners Manual

Peugeot 208: Access to the tools

Peugeot 208 Owners Manual


The tools are installed in the boot under the floor.

To gain access to them:

  • open the boot,
  • lift the floor and remove it.
  • remove the carrier box containing the tools.


List of tools

All of these tools are specific to your vehicle and can vary according to the level of equipment. Do not use them for other purposes.

1. Wheelbrace. For removing the wheel trim and removing the wheel bolts.

2. Jack with integral handle. For raising the vehicle.

3. "Bolt cover" tool. For removing the bolt protectors (covers) on alloy wheels.

4. Socket for the security bolts (located in the glove box). For adapting the wheelbrace to the special "security" bolts.

5. Towing eye. See "Towing the vehicle".

Wheel with trim

When refitting the wheel , refit the trim starting by placing its notch facing the valve and press around its edge with the palm of your hand.

    Changing a wheel

    Access to the spare wheel

    Other info:

    Peugeot 208. Stopping the vehicle
    Before switching off the engine, you can choose to: - move to position N to engage neutral, - leave the gear engaged; in this case, it will not be possible to move the vehicle. In both cases, you m ...

    Nissan Micra. Warning lights
    Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. ...

    Peugeot 208. Locking / unlocking from the inside
    Press the switch. This allows the doors and the boot to be locked or unlocked. If one of the doors is open, the doors are not locked. When locking / deadlocking from outside When the vehicle is ...

    Manuals For Car Models


    © 2016-2025 Copyright www.b-auto.net 0.0086