Peugeot 208: Manual gear changing
Peugeot 208 Owners Manual
This selective gear change mode enables you to overtake, for example, while still remaining in automatic mode.
Operate the + or - steering mounted control paddle.
The gearbox engages the gear requested if the engine speed permits. AUTO is still displayed in the instrument panel.
After a few moments without any action on the controls, the gearbox resumes automatic control of the gears.
Other info:
Peugeot 208. Triggering of the alarm
This is indicated by sounding of the siren and flashing of the direction indicators
for thirty seconds.
The monitoring functions remain active until the alarm has been triggered eleven
times in s ...
Nissan Micra. Changing engine coolant
A NISSAN dealer can change the engine coolant.
The service procedure can be found in the
NISSAN Service Manual.
Improper servicing can result in reduced
heater performance and engine overheati ...
Skoda Fabia. Loosening/tightening wheel bolts
Fig. 141 Changing a wheel: Loosening the wheel bolts
Undoing
Push the wheel wrench onto the wheel bolt as far as the stop1).
Grip the wrench at its end and turn the bolt about one turn in t ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
