Peugeot 208: Manual mode
Peugeot 208 Owners Manual
When the vehicle has moved off, select position M to change to manual mode.
- Pull the lever towards the + sign to change up a gear.
- Push the lever towards the - sign to change down a gear.
The gears engaged appear successively
in the instrument panel screen.
The gear change requests are only carried out if the engine speed permits.
It is not necessary to release the accelerator during gear changes.
When braking or slowing down, the gearbox changes down automatically to permit acceleration in the correct gear.
At very low speed, if reverse gear is requested, this will only be taken into account when the vehicle is immobilised. A warning lamp appears in the instrument panel screen.
On sharp acceleration, the gearbox will not change up unless the driver acts on the gear lever or the steering mounted paddles.
Never select neutral N while the vehicle is moving.
Only engage reverse gear R when the vehicle is immobilised with the brake pedal pressed.
Other info:
Fiat Punto. Access to menu screen
After the “initial check”, it is possible to access the menu screen pressing
the button .
To surf the menu press buttons + or –.
Important if after entering the menu no setting/adjustmen ...
Seat Ibiza. Washer fluid and windscreen wiper blades
Topping up washer fluid
The water for cleaning the windscreen should always be mixed with washer fluid.
Fig. 130 In the engine compartment: Cap of windscreen washer fluid reservoir.
The wi ...
Peugeot 208. Hill start assist
System which keeps your vehicle immobilised temporarily (approximately 2 seconds)
when starting on a gradient, the time it takes to move your foot from the brake
pedal to the accelerator pedal.
T ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
