Fig. 140 Vehicle tool kit
The vehicle tool kit and the jack are housed in a plastic box in the spare wheel or in the storage space for the spare wheel. There is also space here for the removable ball rod for the trailer towing device. The box is attached with a strap on the spare wheel.
The components of the vehicle tool kit (depending on equipment) » Fig. 140.
Screw the car jack back to its initial position after use to store it back in the box with the vehicle tool kit.
WARNING
Under no circumstances attempt to lift heavier vehicles or other loads – there is a risk of injury.
Fiat Punto. Accessories purchased by the owner
If after buying the car, you decide to install electrical
accessories that require a permanent electric supply
(alarm, satellite antitheft system, etc.) or accessories
that in any case burden the e ...
Mazda 2. Supplementary Restraint System Components
Driver/Front passenger infl ators and air bags
Crash sensors, and diagnostic module (SAS unit)
Seat belt pretensioners (page 2-18 )
Front air bag sensor
Side crash sensors *
Air bag/s ...
Honda Fit. Changing the Front Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the
passenger side.
2. Place a cloth on the edge of the lock tab.
Push the lock tab up with a flat-tip
screwdriver.
3. Slide the blade from the ...