
Maintains a constant vehicle speed without having to keep your foot on the accelerator. Use cruise control on freeways or open roads where you can travel at a constant speed with little acceleration or deceleration.


WARNING
Improper use of the cruise control can lead
to a crash.
Use the cruise control only when traveling on open highways in good weather.
It may not be possible to maintain a constant speed when driving uphill or downhill.
When not using cruise control: Turn off cruise control by pressing the CRUISE button.
To Set the Vehicle Speed

Take your foot off the pedal and press the DECEL/SET button when you reach the desired speed.
The moment you release the DECEL/SET button, the set speed is fixed, and cruise control begins. The CRUISE CONTROL indicator comes on.
To Adjust the Vehicle Speed
Increase or decrease the vehicle speed using the RES/ACCEL or DECEL/SET buttons on the steering wheel.

• Each time you press the button, the vehicle speed is increased or decreased by about 1 mph (1.6 km/h).
• If you keep the button pressed, the vehicle speed increases or decreases until you release it. This speed is then set.
You can set the vehicle speed using the DECEL/SET button on the steering wheel when adjusting the speed with the accelerator and brake pedals.
To Cancel

To cancel cruise control, do any of the
following:
• Press the CANCEL button.
• Press the CRUISE button.
• Depress the brake pedal.
• Depress the clutch pedal.
The CRUISE CONTROL indicator goes off.
Resuming the prior set speed: After cruise control has been canceled, you can still resume the prior set speed by pressing the RES/ ACCEL button while driving at a speed of at least 25 mph (40 km/h) or more.
You cannot set or resume in the following situations: • When vehicle speed is less than 25 mph (40 km/h) • When the CRUISE button is turned off
At vehicle speeds of 22 mph (35 km/h) or less, cruise control is canceled automatically.
Seat Ibiza. Climatronic
Control switches
Fig. 96 On the instrument panel: Climatronic controls
The air conditioning system only works when the engine is running and the blower
is switched on.
– Turn the temperature ...
Mazda 2. Engine Start Function When Key Battery is Dead
CAUTION
When starting the engine by holding
the transmitter over the push button
start due to a dead key battery or a
malfunctioning key, be careful not
to allow the following, otherwise t ...
Mazda 2. Key Battery Replacement
If the buttons on the transmitter are
inoperable and the operation indicator
light does not fl ash, the battery may be
dead.
Replace with a new battery before the
transmitter becomes unusable.
...