B-Class car manuals
Peugeot 208: Automatic operation - Automatic gearbox - Driving - Peugeot 208 Owners Manual

Peugeot 208: Automatic operation

Peugeot 208 Owners Manual

Select position D for automatic changing of the four gears.

The gearbox then operates in auto-adaptive mode, without any intervention on the part of the driver. It continuously selects the most suitable gear according to the style of driving, the profile of the road and the load in the vehicle.

For maximum acceleration without touching the gear lever, press the accelerator pedal down fully (kick down). The gearbox changes down automatically or maintains the gear selected until the maximum engine speed is reached. On braking, the gearbox changes down automatically to provide efficient engine braking.

If you release the accelerator sharply, the gearbox will not change to a higher gear for safety reasons.

Never select position N while the vehicle is moving.

Never select positions P or R unless the vehicle is completely stationary.

    Moving off

    Sport and snow programmes

    Other info:

    Fiat Punto. Extending the boot
    Single rear seat Proceed as follows: fasten the seat buckles to the tabs on the seat back (as shown by arrows); check that the webbing (A) of each of the two side seat belts is inserted int ...

    Fiat Punto. Failure warning lights
    Any failure is indicated by cluster warning light coming on together with the message on the reconfigurable multifunction display (where required) (see section “Warning lights and messages”). ...

    Peugeot 208. Parking brake
    If excessive travel or a loss of effectiveness of this system is noticed, the parking brake must be checked, even between two services. Checking this system must be done by a PEUGEOT dealer or a ...

    Manuals For Car Models


    © 2016-2025 Copyright www.b-auto.net 0.0122