B-Class car manuals
Peugeot 208: Changing a bulb - Changing a wheel - Practical information - Peugeot 208 Owners Manual

Peugeot 208: Changing a bulb

Peugeot 208 Owners Manual

The headlamps are fitted with polycarbonate glass with a protective coating:

  • do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product,
  • use a sponge and soapy water,
  • when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals,
  • do not touch the bulb directly with your fingers, use lint-free cloths.

Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns).

It is imperative to use only antiultraviolet (UV) type bulbs in order not to damage the headlamp.

Always replace a failed bulb with a new bulb with the same type and specification.

    Fitting a wheel

    Front lamps

    Other info:

    Chevrolet Sonic. Charging System Light
    This light will come on briefly when the ignition is turned on, and the engine is not running, as a check to show it is working. It should go out when the engine is started. If it stays on, or co ...

    Honda Fit. Cruise Control
    Maintains a constant vehicle speed without having to keep your foot on the accelerator. Use cruise control on freeways or open roads where you can travel at a constant speed with little accelerati ...

    Honda Fit. Fastening a Seat Belt
    After adjusting a front seat to the proper position, and while sitting upright and well back in the seat: 1. Pull the seat belt out slowly. 2. Insert the latch plate into the buckle, then tu ...

    Manuals For Car Models


    © 2016-2025 Copyright www.b-auto.net 0.0097