A. Model with light guide
1. Main beam headlamps (H7-55W).
2. Dipped beam headlamps (H7-55W).
3. Daytime running lamps / sidelamps (light emitting diodes - LEDs).
4. Direction indicators (PWY-24W).
5. Front foglamps (directional according to version) (H11-55W)).
B. Model without light guide
1. Main beam headlamps (H7-55W).
2. Dipped beam headlamps (H7-55W).
3. Daytime running lamps / sidelamps (W5-5W).
4. Direction indicators (PWY-24W).
5. Front foglamps (directional according to version) (H11-55W).
In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
Changing direction indicator bulbs
Rapid flashing of the direction indicator warning lamp (right or left) indicates the failure of a bulb on that side.
To reassemble, carry out these operations in reverse order.
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour.
When refitting, close the protective cover carefully to preserve the sealing of the headlamp.
Changing dipped beam headlamp bulbs
To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom (model A ) or at the top (model B) .
Changing main beam headlamp bulbs
To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom.
Changing daytime running lamp / sidelamp bulbs
Turn the bulb holder a quarter turn and pull it out.
Pull out the bulb and replace it.
To reassemble, carry out these operations in reverse order.
Changing the daytime running lamps / sidelamps (light-emitting diodes - LEDs)
For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.
Changing front foglamp / directional lamps
To reassemble, carry out these operations in reverse order.
To obtain this module, contact a PEUGEOT dealer or a qualified workshop. You can also contact a PEUGEOT dealer or a qualified workshop for this replacement.
Changing integrated direction indicator side repeater bulbs
To reassemble, carry out these operations in reverse order.
You should contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.
Skoda Fabia. Raising the vehicle
Fig. 142 Jacking points for positioning lifting jack
Fig. 143 Attach lifting jack
Position the car jack below the jacking point closest to the flat tyre » Fig.
142.
The jacking point i ...
Chevrolet Sonic. Turning the Systems Off and On
The button for TCS and StabiliTrak is on the center console.
Caution
Do not repeatedly brake or accelerate heavily when TCS is off. The vehicle
driveline could be damaged.
To turn off only TCS, ...
Chevrolet Sonic. Braking
Braking action involves perception time and reaction time. Deciding to push the
brake pedal is perception time. Actually doing it is reaction time.
Average driver reaction time is about three-quart ...