Peugeot 208: Locking the vehicle with exterior perimeter monitoring only
Peugeot 208 Owners Manual
Deactivate the interior volumetric monitoring to avoid unwanted triggering of the alarm in certain cases such as:
- leaving a pet in the vehicle, - leaving a window partially open, - washing your vehicle.
Deactivation of the interior volumetric monitoring
Switch off the ignition.
Within ten seconds, press the button until the indicator lamp is on continuously.
Get out of the vehicle.
Press the locking button on the remote control immediately.
The exterior perimeter monitoring alone is activated: the indicator lamp in the button flashes once per second.
To be effective, this deactivation must on the remote control. be carried out each time the ignition is switched off.
Reactivation of the interior volumetric monitoring
Press the unlocking
button on the remote control to deactivate the exterior perimeter monitoring.
Press the locking button
on the remote control to activate all the monitoring functions.
The indicator lamp in
the button again flashes once per second.
Other info:
Peugeot 208. Identifi cation markings
Various visible markings for the identification of your vehicle.
A. Vehicle Identification Number (VIN) under the bonnet. This number is engraved
on the bodywork near the damper support.
B. Vehi ...
Peugeot 208. Hill start assist
System which keeps your vehicle immobilised temporarily (approximately 2 seconds)
when starting on a gradient, the time it takes to move your foot from the brake
pedal to the accelerator pedal.
T ...
Honda Fit. Fuel Information
■ Fuel recomme
Unleaded gasoline, pump octane number 87 or higher
Use of lower octane gasoline can cause a persistent, heavy metallic knocking
noise
that can lead to engine damage.
■ ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
