Peugeot 208: Starting using another battery
Peugeot 208 Owners Manual
Peugeot 208 / Peugeot 208 Owners Manual / Practical information / Battery / Starting using another battery
- Connect the red cable to the positive terminal (+) of the flat battery A , then to the positive terminal (+) of the slave battery B.
- Connect one end of the green or black cable to the negative terminal (-) of the slave battery B.
- Connect the other end of the green or black cable to the earth point C on your vehicle (engine mounting).
- Operate the starter, let the engine run.
- Wait until the engine returns to idle and disconnect the cables.
Other info:
Citroen C3. "ISOFIX" mountings
Your vehicle has been approved in accordance
with the new ISOFIX regulation .
The seats, represented below, are fi tted
with regulation ISOFIX mountings:
These are three rings for each seat:
...
Nissan Micra. Changing engine oil
Park the vehicle on a level surface and apply
the parking brake.
Start the engine and let it idle until it reaches
operating temperature, then turn it off.
Remove the oil filler cap A b ...
Ford Fiesta. Safety Belts
Principle of Operation
WARNINGS
Always drive and ride with your seat
back upright and the lap belt snug
and low across the hips.
To reduce the risk of injury, make
sure children sit where they can be ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia - Honda Pilot
- Volkswagen ID4
- Toyota Prius
© 2016-2026 Copyright www.b-auto.net 0.0093