Free wheeling
For safety reasons, do not free wheel. If free wheeling, some vehicle functions will no longer be active.
A heavy object (key fob...), attached to the key and weighing down on its shaft in the ignition switch, could cause a malfunction.
Key left in the "Ignition on" position
On opening the driver's door, an alert message is displayed, accompanied by an audible signal, to remind you that the key is still in the ignition switch at position 1 (Stop).
If the key has been left in the ignition switch at position 2 (Ignition on), the ignition will be switched off automatically after one hour. To switch the ignition back on, turn the key to position 1 (Stop) , then back to position 2 (Ignition on).
Peugeot 208. Speed limiter
System which prevents the vehicle from exceeding the speed programmed by the
driver. When the programmed speed limit is reached, pressing the accelerator pedal
in the normal manner no longer has a ...
Peugeot 208. Stop & Start
Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you ...
Nissan Micra. Readiness for inspection/maintenance (I/M) test
Due to legal requirements in some Canadian
Provinces, your vehicle may be required to be in
what is called the “ready condition” for an
Inspection/Maintenance (I/M) test of the emission
contro ...