
The infotainment system can only play back.mp3 and.wma files from a USB drive.
Only the first 2,500 songs are recognized on the device.
When a device is not supported, the message “No supported data found. You can safely disconnect the device” appears.
Connecting a USB Drive
Connect the USB drive to the USB port.
Searching for a Track
It is normal for the search feature to take some time to display the information after reading the device due to the amount of information stored.
Files that do not have any meta data stored in the ID3 tag display as Unknown.
Tracks can be searched for by:
*This only displays if a playlist is found on the device.
To search for tracks:
1. Turn the Push/MENU/ TUNE knob.
2. Select Search.
3. Select: Playlists, Artists, Albums, Song Titles, Genres, or Folder View.
4. Select the track.
Shuffle Functionality
Turn the Push/MENU/TUNE knob and set Shuffle Songs (Random) to On or Off.
On: Plays current tracks in random order.
Off: Plays current tracks in sequential order.
Repeat Functionality
Turn the Push/MENU/TUNE knob and set Repeat to On or Off.
Repeat On: Repeats the current track.
Repeat Off: Playback starts from the beginning of the current track after the last track finishes.
Mazda 2. Essential Information
Introduction
Be extremely careful and prevent injury to yourself and others or damage to
your vehicle
when using this manual for inspection and maintenance.
If you are unsure about any procedur ...
Peugeot 208. Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected
but is not switched on (PAUSE).
Set the programmed speed by accelerating to the required speed, then pre ...
Mazda 2. Windscreen Wipers and Washer
The ignition must be switched ON to use
the wipers.
WARNING
Use only windscreen washer fl uid or
plain water in the reservoir:
Using radiator antifreeze as washer
fl uid is dangerous. If sprayed ...